Skip to content
Server Security Center
KEVmedium6.3

CVE-2018-0161: Cisco IOS Software Resource Management Errors

Cisco IOS Software · listed in the CISA catalog of actively exploited vulnerabilities since 2022-03-03.

CVSS v3.1 (CISA ADP)
6.3
medium
EPSS (exploit probability, 30 days)
4.1%
higher than 91% of all CVEs
Added to CISA KEV
2022-03-03
US federal due date 2022-03-17
Automatable (CISA SSVC)
no
technical impact: partial

CVE-2018-0161 explained

CVE-2018-0161 is a denial of service vulnerability in the SNMP subsystem of Cisco IOS Software on certain Cisco Catalyst switches. Processing an SNMP read request for the ciscoFlashMIB object ID can force the device to restart. CISA lists it as known to be exploited, so affected switches warrant prompt attention.

Impact

An authenticated, remote attacker with SNMP access can cause an affected switch to restart due to a SYS-3-CPUHOG condition, interrupting network service. Attack complexity is high and low privileges are required. There is no impact on confidentiality or integrity. CISA rates it as not automatable with partial technical impact. Only devices configured to use SNMPv2 or SNMPv3 are affected.

Who is affected

The CVE record describes the affected versions in free text: vulnerable releases of Cisco IOS running on Cisco Catalyst 2960-L Series Switches, Cisco Catalyst Digital Building Series Switches 8P and Cisco Catalyst Digital Building Series Switches 8U, when configured to use SNMPv2 or SNMPv3. The Cisco Bug ID is CSCvd89541. The CVE record names no fixed version; consult the Cisco advisory for fixed releases.

Written with AI from the data on this page and checked against it automatically.

Official description

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software running on certain models of Cisco Catalyst Switches could allow an authenticated, remote attacker to cause a denial of service (DoS) condition, aka a GET MIB Object ID Denial of Service Vulnerability. The vulnerability is due to a condition that could occur when the affected software processes an SNMP read request that contains a request for the ciscoFlashMIB object ID (OID).

An attacker could trigger this vulnerability by issuing an SNMP GET request for the ciscoFlashMIB OID on an affected device. A successful exploit could cause the affected device to restart due to a SYS-3-CPUHOG.

This vulnerability affects the following Cisco devices if they are running a vulnerable release of Cisco IOS Software and are configured to use SNMP Version 2 (SNMPv2) or SNMP Version 3 (SNMPv3): Cisco Catalyst 2960-L Series Switches, Cisco Catalyst Digital Building Series Switches 8P, Cisco Catalyst Digital Building Series Switches 8U. Cisco Bug IDs: CSCvd89541.

CISA required action: Apply updates per vendor instructions.

CISA notes

Affected and fixed versions

From the CVE record published by the vendor or CVE numbering authority.

  • Cisco IOS
    Affected
    • Cisco IOS
    Fixed in
    not stated

    Version statement as published by the CNA (free text).

How to fix it

  • The CVE record names no fixed version – check the vendor advisory and CISA's required action for updates and mitigations.
  • Vendor advisory: tools.cisco.com/security/center/content/CiscoSecurityAdvi…
  • CISA's deadline for US federal agencies: 2022-03-17 (passed) – a useful benchmark for everyone else, too.

What to do

  1. Identify Cisco Catalyst 2960-L and Catalyst Digital Building Series 8P and 8U switches running Cisco IOS with SNMPv2 or SNMPv3 enabled.
  2. Apply updates per Cisco's instructions, using the vendor advisory and Bug ID CSCvd89541 to find a fixed release.
  3. Restrict SNMP access to trusted management hosts and keep management interfaces off the internet.
  4. Rotate SNMP community strings and SNMPv3 credentials, since the attacker must be authenticated.
  5. Review device logs for unexpected restarts or SYS-3-CPUHOG messages.

The CVE record names no fixed version. Follow the Cisco advisory to find a fixed Cisco IOS release and apply updates per vendor instructions, as CISA requires. Until updated, limit SNMP access to trusted management stations, protect SNMP credentials, and monitor affected switches for unexpected restarts.

Written with AI from the data on this page and checked against it automatically.

CISA's assessment (SSVC)

Exploitation
Exploited in the wild
Automatable
No – each attack needs manual steps
Technical impact
Partial – limited control or information

Weakness: CWE-399

Questions about CVE-2018-0161

Are all Cisco IOS devices affected?
No. The description names Cisco Catalyst 2960-L Series Switches and Cisco Catalyst Digital Building Series Switches 8P and 8U running a vulnerable Cisco IOS release and configured for SNMPv2 or SNMPv3.
Is this vulnerability exploited in the wild?
Yes. CISA added CVE-2018-0161 to its Known Exploited Vulnerabilities catalog on 2022-03-03, with a US federal due date of 2022-03-17. Known ransomware use is listed as unknown.
Can an unauthenticated attacker trigger it?
No. The attacker must be authenticated, meaning valid SNMP access to the device is required. Restricting and protecting SNMP access reduces exposure.

Written with AI from the data on this page and checked against it automatically.

References

Data: CISA Known Exploited Vulnerabilities (public domain) · CVE Program records incl. CISA ADP enrichment · OSV.dev (CC BY 4.0) incl. Ubuntu and Debian security data · FIRST EPSS · endoflife.date. Updated automatically – facts last changed 2026-11-22. Always confirm with the vendor's or distribution's advisory before patching.